Automating the Upsert

One process that any SQL developer typically gets tired of over the years is writing the update/insert (aka Upsert) statement at the bottom of a stored procedure that loads data to the target table. Wouldn’t it be great if you never had to write that again Smile ? Well, I finally got tired of it and developed a user stored procedure that takes in 5 parameters to automate upserts. The parameters are:

  1. The Target Database Name (@target_db)
  2. The Target Table Name (@target_tbl)
  3. The Target Schema Name (@target_sch) | Defaults to “dbo”
  4. The Source Table Name (@source_tbl)
  5. Delete Non Matching Data Flag (@delt_no_match) | Defaults to False “0”
    1. This parameter (when flipped to true) deletes rows out of the target table if they do not exist in the source, based on the primary key

The way this proc works is that it examines the primary key on the target table and verifies that the source table can align to the target key structure by implementing a unique covering index on the source. BOL suggests that merge statements are optimized better when a unique covering index is used on the source data set. Because of this implementation of a unique index, the proc today is constrained to only allow source tables that are temporary tables (either local or global) for security reasons. It then builds and executes a dynamic SQL merge statement by using the metadata from both tables and matches columns based on their names. But the proc also has a few extra useful features:

  1. Automatically sets the update snapshot timestamp to the current datetime if the target table has a column called “last_upd_ts”. There is no need to pre-program this column in the source
  2. If the unique index on the source table fails, an email in the try/catch block can email a user the duplicate rows to allow for quicker research of why the source failed when attempting to upsert to the target.

To better illustrate this, let’s walk through an example that loads some data to a temporary table and then runs the upsert proc. The full code for this upsert proc is attached at the end.

Creating Foundational Base Tables

First, we will create the target table that we want to use to upsert data to. In this example, I’m using my blog_posts database for this, but you can use any database you’d like.

USE blog_posts	
	 rgn_id int not null
	,fscl_wk smallint not null
	,last_upd_ts datetime2 not null
	,sls_units float
	,sls_amount float     ,primary key (rgn_id, fscl_wk)

Load Some Data to a temporary source table

In this section, we will create a source temporary table and load some data in it to simulate for the upsert. Notice that when we create the source temporary table, we don’t bother creating a primary key or unique index. The upsert proc will take care of this. Also notice that we have left the “last_upd_ts” column out of the source table. The upsert proc looks for this column on the target and will update the column to the timestamp that the proc was run to simplify the upsert process.

CREATE TABLE #tmp_sls (
	 rgn_id int not null
	,fscl_wk smallint not null
	,sls_units float
	,sls_amount float

DECLARE @now datetime2 = getdate()
	 (1, 1, @now, 50, 28.75)
	,(1, 2, @now, 26.44, 37.31)

Run the Upsert 

In this section, we will execute the upsert proc to merge the source data to the target.

EXEC sp_upsert @target_db = 'blog_posts' ,@target_tbl = 'SALES_FACTS'  

,@target_sch = 'UPSERT_DEMO'  

,@source_tbl = '#tmp_sls' ;

That’s all there is to it. This proc has saved me tons of hours when developing procedures to move data. Remember that the few key things when using this proc are:

  • The proc matches columns based on their names so make sure your source and target columns have the same name. Otherwise, this proc has no way of matching the data
  • The target table must have a primary key. Otherwise, the dynamic merge statement does not know how to align the source and target
  • The source table (for security reasons) must be a temporary table (local or global)
  • If your target table has a column called “last_upd_ts”, the uspert proc will populate it with the current GETDATE() from the SQL Server based on what rows are affected by the upsert

When my coworkers and I started using this proc, we left our existing legacy ETL alone, since a lot of that ETL had source temp table columns that weren’t the same as the target. But for newer work, we started embracing this upsert proc, and have never looked back.

**A quick word of caution**: ALWAYS test new procedures (e.g. this proc sp_upsert) in a Q/A environment first to ensure the desired results prior to using in a production environment.

I hope this helps many others to save time when writing SQL ETL that involves an upsert at the end. Feel free to let me know if you have any suggestions or questions.

And Here is the Code. Enjoy!

USE blog_posts

-- =============================================
-- Author:		Matt Martin
-- Create date: 2013-11-07
-- Description:	Executes a merge based on the target and source table passed in

	Assumptions	for running this proc
		1) Target table has a primary key
		2) Source Table is a temp table (local "#" or global "##" hash)
		3) Source and Target Table columns are matched based on the name
			- the target and/or the source can have more columns than each other
				- we will only update what is both in target and source
				- we will only insert what is in source and has a corresponding column name in the target
		4) if no schema is supplied for the target table, its assumed to be dbo

-- =============================================
CREATE PROCEDURE [dbo].[sp_upsert] 
	 @target_db	varchar(250)
	,@target_tbl	varchar(500)
	,@target_sch	varchar(250) = 'dbo'
	,@source_tbl	varchar(500)
	,@delt_no_match bit = 0

		 @msg varchar(max)
		,@sql nvarchar(max)
		,@tgt_has_last_upd_ts bit
		,@tgt_tbl_full_path varchar(1000) = case 
								when left(@target_tbl,1) = '#' then 'tempdb..'+@target_tbl
								else '['+@target_db+'].['+@target_sch+'].['+@target_tbl+']' 
		,@src_tbl_full_path varchar(1000) = 'tempdb..'+@source_tbl
		,@tgt_object_id int 
		,@src_object_id int
		,@crlf char(2) = char(13)+char(10)

	set @tgt_object_id = object_id(@tgt_tbl_full_path,'U');
	set @src_object_id = object_id(@src_tbl_full_path,'U');

	-- ===================================================================================================================================
	-- Validate Parameters

	-- check target db
	if db_id(@target_db) is null 
			set @msg = 'Error: Target Database ['+@target_db+'] is not in the server database catalog. Stopping Proc.'
			raiserror(@msg,16,1) with nowait;
			return 16;

	-- check target object
	else if @tgt_object_id is null 
			set @msg = 'Error: Target Table '+@tgt_tbl_full_path+' does not exist. Stopping Proc.'
			raiserror(@msg,16,1) with nowait;
			return 16;

	-- check source object
	else if @src_object_id is null
			set @msg = 'Error: Source Table ['+@source_tbl+'] does not exist. Stopping Proc.'
			raiserror(@msg,16,1) with nowait;
			return 16;

	-- check that source is a hash
	else if left(@source_tbl,1) <> '#'
			set @msg = 'Error: This upsert procedure requires that the source table is a hash/temp table prefixed with "#" or "##". '+@crlf
			+'Source table passed in ['+@source_tbl+'] does not begin with a hash. Stopping Proc.'
			raiserror(@msg,16,1) with nowait;
			return 16;

	-- ======================================================================
	-- Load Table Catalog

	declare @tbl_cat as table (col_nm varchar(250), ord_pos smallint, is_pk bit, pk_ord_pos smallint, exists_in_src bit);

	set @sql = 
			select, c.column_id
				,case when ic.index_column_id is not null then 1 else 0 end as is_pk
				,ic.key_ordinal as pk_ord_pos
				,case when is not null then 1 else 0 end as exists_in_src
			from '+@target_db+'.sys.columns as c with (nolock)
				left join '+@target_db+'.sys.indexes as i with (nolock)
					on c.object_id = i.object_id and i.is_primary_key = 1 
				left join '+@target_db+'.sys.index_columns as ic with (nolock)
					on i.object_id = ic.object_id and i.index_id = ic.index_id and c.column_id = ic.column_id
				left join (
						select name from tempdb.sys.columns with (nolock) where object_id = '+cast(@src_object_id as varchar(50))+'
					) as src
						on =
			where c.object_id = '+cast(@tgt_object_id as varchar(50))+' and c.is_identity = 0

	insert @tbl_cat (col_nm, ord_pos, is_pk, pk_ord_pos, exists_in_src)
	-- ---------------------------------------------------------------------------------------
	-- Check that a primary key exists in the target

	if not exists(select 1 from @tbl_cat where is_pk = 1)
			set @msg = 
				 'Error: Target Table '+@tgt_tbl_full_path+' does not contain a primary key.'+@crlf
				+'This upsert proc requires a primary key on the target table to ensure how to join the target and source tables correctly. Stopping Proc.'
			raiserror(@msg,16,1) with nowait;

			return 16;

	-- -----------------------------------------------------------------------------------------------------------------------------
	-- End Param validation     declare 
		 @join_txt nvarchar(max)
		,@matched_txt nvarchar(max)
		,@unmatched_insert_txt varchar(max)
		,@unmatched_values_txt varchar(max)
		,@last_upd_ts nvarchar(30)
		,@existing_ci_nm nvarchar(250)

		Merge/Upsert statements have 3 basic parts:
		1 - The target and source table specification with join
		2 - the matched clause (update part)
		3 - The unmatched clause (insert part)

		The proc below assembles a merge statement concatenating these three parts together	and then executes said merge statement


	-- -------------------------------------------------------------------------------------------------
	-- Check if the target has a last_upd_ts column

	if exists(select 1 from @tbl_cat where col_nm = 'last_upd_ts') 
			set @tgt_has_last_upd_ts = 1
			set @tgt_has_last_upd_ts = 0
	-- ===================================================================================================================
	-- ===================================================================================================================
	-- [2] Build Out Merge SQL Text
		-- consists of 3 parts
			-- - i. Join Text
			-- - ii. Match Text
			-- - iii. Not Matched Text
	-- this spacer helps for formatting the merge text getting assembled
	declare @spacer varchar(50) = @crlf+'						';

	-- ===================================================================================================================
	-- [2i]. Join Text 

	select @join_txt = isnull(@join_txt,'')
		-- add in a break in the text to make it more readable
		+case when ROW_NUMBER() over(order by pk_ord_pos) % 3 = 0 then @spacer else '' end
		+' and tgt.['+col_nm+'] = src.['+col_nm+']' 
	from @tbl_cat
	where is_pk = 1

	-- trim off the first "and "
	set @join_txt = right(@join_txt,len(@join_txt) - 5);

	-- ===================================================================================================================
	-- [2ii]. Matched Text

	select @matched_txt = 
		-- add line breaker every three recs for merge text format
		+ case when ROW_NUMBER() over(order by t.ord_pos) % 3 = 0 then @spacer else '' end
		+', tgt.['+t.col_nm+'] = src.['+t.col_nm+']'
	from @tbl_cat as t
	where t.is_pk <> 1 and t.col_nm <> 'last_upd_ts' and exists_in_src = 1
	order by t.ord_pos

	-- trim off the leading spaces & breaker
	set @matched_txt = right(@matched_txt,len(@matched_txt) -2);
	-- if a last_upd_ts column exists, tack it on the end of the update
	if @tgt_has_last_upd_ts = 1 begin

		set @matched_txt = @matched_txt + ', tgt.[last_upd_ts] = @now';

	-- ===================================================================================================================
	-- [2iii]. Not Matched Text
	select @unmatched_insert_txt = 
		-- add line breaker every three recs for merge text format
		+ case when ROW_NUMBER() over(order by t.ord_pos) % 6 = 0 then @spacer else '' end
		+ ', ['+t.col_nm+']'
	from @tbl_cat as t
	where t.col_nm <> 'last_upd_ts' and exists_in_src = 1
	order by t.ord_pos

	-- trim off the leading spaces & breaker
	set @unmatched_insert_txt = right(@unmatched_insert_txt,len(@unmatched_insert_txt) - 2);

	set @unmatched_values_txt = replace(@unmatched_insert_txt, '[','src.[');

	-- add last_upd_ts if exists
	if @tgt_has_last_upd_ts = 1 

			set @unmatched_insert_txt = @unmatched_insert_txt + ', [last_upd_ts]';
			set @unmatched_values_txt = @unmatched_values_txt + ', @now';


	-- ====================================================================================================================
	-- [3] Optimize the temp table to prepare for Upsert

		-- [a] Create unique non-clustered covering index

	declare @cover_clause varchar(max) = '('+stuff(
			select ', ['+t.col_nm+']'
			from @tbl_cat as t
			where t.col_nm <> 'last_upd_ts'
				and t.is_pk <> 1
				and exists_in_src = 1
			order by t.ord_pos 
		for xml path ('')),1,2,'')+')'

	set @sql = 'create unique nonclustered index ['+(select cast(newid() as varchar(50)))+']  on ['+@source_tbl+']'	
				+' ('+stuff((select ', ['+col_nm+']' from @tbl_cat where is_pk = 1 order by pk_ord_pos for xml path ('')),1,2,'')+')';
	-- update covering predicate
	set @sql = @sql + ' INCLUDE '+@cover_clause;

	begin try
	end try
	begin catch

		-- If the error was a dup...load it into a global hash and email out the recs

		if charindex('The CREATE UNIQUE INDEX statement terminated because a duplicate key', error_message()) > 0

				declare @dups_sql varchar(max)

				declare @tmp_on_clause varchar(max), @gtt varchar(250), @tmp_keys varchar(max);

				set @tmp_keys = stuff((select ', ['+col_nm+']' from @tbl_cat where is_pk = 1 order by pk_ord_pos for xml path ('')),1,2,'')

				set @tmp_on_clause = 'on '+stuff((select 'and tmp.['+col_nm+'] = dups.['+col_nm+'] ' from @tbl_cat where is_pk = 1 order by pk_ord_pos for xml path ('')),1,3,'')

				set @gtt = '##'+cast(replace(newid(),'-','_') as varchar(250));

				-- isolate dups to global temp
				set @dups_sql = 
						select tmp.*
						into ['+@gtt+']
						from '+@source_tbl+' as tmp
							inner join (
								select '+@tmp_keys+'
								from '+@source_tbl+'
								group by '+@tmp_keys+'
								having count(*) >=2
							) as dups


				-- just give the top 1000 recs
				set @dups_sql = 'set nocount on; select top 1000 * from ['+@gtt+']';

				set @msg = 
					 'Note: During proc usp_run_upsert, duplicate records were detected, and the proc failed.<br>'
					+'Attached is a list of duplicate records found during the upsert attempt.<br>'
					+'Notes on usp_upsert proc:<br><br>'
						+'<li>Source Table: '+@source_tbl+'</li>'
						+'<li>Target Table: '+@tgt_tbl_full_path+'</li>'
						+'<li>Target Key Column(s): '+@tmp_keys+'</li>'
				exec msdb.dbo.sp_send_dbmail
					 @recipients = ''
					,@subject = 'Duplicates found during sp_run_upsert'
					,@body = @msg
					,@query = @dups_sql
					,@query_attachment_filename = 'dups.csv'
					,@attach_query_result_as_file = 1
					,@query_result_separator = '	'
					,@query_result_header = 1
					,@query_result_width = 32767
					,@query_result_no_padding = 1
					,@exclude_query_output = 1
					,@body_format = 'HTML'

				-- drop global hash once complete
				if object_id('tempdb..'+@gtt) is not null exec('drop table '+@gtt);


		-- throw it
		set @msg = 'Error attempting to create unique index on table ['+@source_tbl+'] during the usp_run_upsert proc'+@crlf
			+'Error Message: '+error_message()
		return 16
	end catch

	-- =====================================================================================================================
	-- [4] Assemble Merge command

	set @sql = 
			'+ case when @tgt_has_last_upd_ts = 1 then 'DECLARE @now DATETIME2 = getdate();' else '' end+'
			MERGE ['+@target_db+'].['+@target_sch+'].['+@target_tbl+'] WITH (TABLOCK) AS TGT
				USING ['+@source_tbl+'] AS SRC WITH (TABLOCK)
					INSERT (
					VALUES (
				'+case when @delt_no_match = 1 then 'WHEN NOT MATCHED BY SOURCE THEN DELETE' else '' end +'

	-- run it
	begin try
		--print @sql

	end try
	begin catch
		-- note: we are breaking the error read-out into two parts because the raiserror msg only supports 2048 characters

		set @msg = ''
		set @msg = @msg + '<<< ERROR RUNNING USP_RUN_UPSERT >>>'+@crlf;
		set @msg = @msg + 'Below is the error readout and the merge statement that forced the error. Please review.'+@crlf;
		set @msg = @msg + 'error message -> '+ error_message()+@crlf;
		set @msg = @msg + 'error line -> '+ cast(error_line() as varchar(5))+@crlf;
		set @msg = @msg + '========================================================================================'+@crlf;


		set @msg = ''
		set @msg = @msg + 'Merge statement that forced error.'+@crlf;
		set @msg = @msg + '--********************************--'+@crlf;
		set @msg = @msg + @sql;

		raiserror(@msg, 16,16);

		-- get out of dodge
		return 16

	end catch

Automating the Upsert

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s